ADESA and Manheim Auction Pickup in BC: A Dealer's Guide
The full pickup process from winning bid to your lot — gate releases, buyer numbers, common delays, and how to keep floor plan interest short.
By C2C Transport Dispatch
Every day a purchased vehicle sits at ADESA or Manheim is a day of floor plan interest, a day off your reconditioning bench, and a day you can't retail it. The pickup process itself isn't complicated — it's a sequence of documents and authorizations that fails when any one piece is missing. This guide walks the sequence in the order it usually happens for a BC dealer buying at an auction such as ADESA Vancouver in Richmond.
The pickup sequence, start to finish
- Bid wins and is invoiced by the auction. Payment clears according to the auction and your account or floor plan terms; confirm timing with the auction.
- Auction generates a Vehicle Release Form (gate pass) with the buyer number, sale number, VIN, and release location.
- Buyer emails or forwards the gate pass to the transporter along with dropoff address and any special instructions (keys, subs, missing parts).
- Transporter dispatches a driver with the gate pass on file. Driver arrives at the release gate with photo ID and the buyer's account number.
- Auction verifies payment cleared and the gate pass matches. Vehicle is released from the storage lot.
- Driver performs walk-around inspection, photographs all four corners plus odometer and any pre-existing damage, and signs the auction's outgate document.
- Vehicle is loaded, transit begins, dropoff is signed off at the dealership on a digital Bill of Lading.
Nothing in that list is exotic. What breaks it is when one item is assumed instead of confirmed. Below is what actually delays pickups and how experienced BC transporters work around each one.
Gate releases: the number-one delay
A gate pass is not the same as a paid invoice. ADESA and Manheim both require the gate release to be flagged in their internal system before the vehicle is physically outgated — even if you paid within minutes of the hammer drop. On busy sale days the release desk can run behind live sale activity. Drivers who show up before the release is flagged get told to wait, which burns a truck slot that could have gone to the next stop.
The practical rule: don't dispatch a driver until the gate pass PDF is in your transporter's hands and your account shows PAID in the auction portal. Sending a driver with just an invoice or verbal confirmation is how vehicles sit an extra day. Check when your auction typically issues gate passes after a sale, and plan pickup around that rather than around the hammer time.
Buyer numbers, PINs, and who's actually authorized
The buyer number on the gate pass has to match the account the auction has on file for the party paying — not your rep, not your salesperson, not a related dealership. If your group operates multiple rooftops under separate ADESA accounts, the gate pass and the payment have to come from the same one. Mismatches between rooftops usually trigger a manual review at the release desk, which adds delay.
Transporters need a signed Authorization to Release form or the gate pass explicitly naming them as the pickup agent. Each auction has its own rules for how carriers are authorised, so confirm them with the auction. If you switch carriers, tell the auction before pickup day, not the morning of.
Common delays and what causes them
Missing keys or lost fob at outgate
Auction yards handle large volumes of vehicles, and keys occasionally get separated from the unit. The driver flags this at outgate and the auction retrieves the key, which adds delay. Repeat offender lots are worth noting; some dealerships pre-request key confirmation the day before pickup for units they know are prone to it.
Paperwork on paid vehicles that aren't ready
Auctions won't release a unit that still has a mechanical arbitration hold, an as-is disclosure that hasn't been countersigned, or a title that hasn't cleared the previous owner's release. These holds don't always surface until the driver is at the gate. If you know a unit has a mechanical announcement, ask the auction to confirm the release status before dispatching.
Trucks arriving outside gate hours
Auction outgates have set hours, which the auction publishes and can change. A driver who hits highway traffic can miss the window and lose the day, so transporters running longer routes to an auction should build in buffer time and communicate realistic ETAs early.
Cross-border returns from Manheim Bellingham or Seattle
Vehicles imported into Canada need the correct import paperwork for CBSA and the Registrar of Imported Vehicles, and outstanding recalls can block admissibility. Check current requirements with CBSA or your customs broker. The paperwork side is on the importer, not the transporter, but delays show up as a truck waiting at the border.
What actually sets auction-to-lot timing
- When the auction flags the unit as paid and released — usually the biggest variable.
- Distance from the auction to your lot, and whether the route includes a mountain pass, ferry or border crossing.
- Whether the unit can share a truck with other pickups going the same way.
- Auction outgate hours on the day of pickup.
- Weather and road conditions, especially on Interior routes in winter.
Ask your transporter for a confirmed pickup window once the gate pass is in hand, rather than relying on a generic transit table. If a broker re-brokers the load to another carrier, ask who will actually run it.
What a professional transporter should be doing for you
- Parsing the gate pass PDF the moment you forward it — VIN, buyer number, sale number, release location all validated against the auction's outgate rules.
- Confirming payment status and release flag through their carrier account before dispatching a driver.
- Sequencing multi-unit pickups from the same auction into one truck slot to avoid multiple release-desk visits.
- Providing timestamped condition photos at pickup that become part of your permanent record, not just a text message that gets lost.
- Giving you a realistic delivery window and updating you if it changes.
The one habit that shortens every pickup
Forward the gate pass to your transporter the moment the auction sends it, even if you don't need the vehicle for two days. Getting the PDF into dispatch's system early lets the carrier sequence your unit into a truck run that's already going that direction, instead of scrambling a dedicated slot at the last minute. Getting the paperwork in early is one of the simplest ways to avoid a vehicle sitting at the auction longer than it needs to. Everything else in this guide is about avoiding the ways the process breaks — this one habit is about actively shortening it.
C2C Transport picks up from BC auctions including ADESA Vancouver in Richmond. Send your gate pass through the dealer portal or to team@c2ctransport.ca and dispatch will confirm a pickup window.
